Allen & Heath GL2400

The GL2400 is a compact, dual function, LR, Mono sum, 4 group, 6 aux, 7x4 matrix console.  Frame sizes range from 16 to 40 channel including 2 dual stereo channels.

• 16, 24, 32, 40 channel frames 
• LR and M main outputs 
• 4 Audio groups with pan control 
• 6 Auxiliary sends with per-channel pre/post fader switching 
• 2 stereo channels each with mic and dual stereo line inputs 
• 7x4 Matrix 
• Proper dual functionality for FOH and/or Monitor mixing 
• M can be configured as LR sum, Wedge, or Aux-Fed Sub or C master 
• Recording capable with channel direct outputs 
• Matrix external inputs with level trims and common input capability 
• Responsive 4 band, 2 sweep EQ 
• 100Hz channel high pass filters 
• Individual phantom power and Polarity switching 
• Dedicated Channel, Master and stereo Monitor meters 
• Mutes, meters and AFL on all fader masters 
• Assignable talkback 
• Headphones and local monitor outputs 
• Electronically balanced XLR outputs with +26dBu drive capability 
• Preamp +34dBu maximum input capability for mic or line 
• Ultra low noise mix head amp design

GL2400 Datasheet

Allen & Heath iLive T

Series provides distributed audio and control, various configuration possibilities, an intuitive instant access analogue-style user interface, and features the same great-sounding 64x32 RackExtra DSP mix engine as our highly successful iLive range. 2 new control surfaces and 2 new mixracks use compact construction with non-modular classic format I/O, new proprietary Audio and Control over Ethernet (ACE)TM digital snake and the latest dual core DSP technology to make iLive accessible to engineers. There is an optional card slot for popular audio networking solutions as well as a host of control options.

• Distributed system - Separate MixRack and Surface
• Choice of three MixRacks (32, 48 or 64 mic)
• Choice of two Surfaces (20 or 28 fader, 4 layers)
• TCP/IP network and PL-Anet control
• ACE™ Audio and Control over Ethernet link up to 120m single CAT5 (depending on cable used)
• Systems from 40in/24out to 64in/36out sockets
• New, high grade, recallable mic/line preamps
• Local analogue and SPDIF I/O available at the surface
• 64x32 RackExtra DSP engine with 8 stereo FX processors
• Stereo FX slots emulating high quality popular devices
• Up to 72 sources to the mix
• 3 Dynamics, PEQ, HPF and Delay on all 64 channels
• 2 Dynamics, PEQ, Delay and GEQ on all 32 mixes
• Fully configurable audio bus architecture
• 10 Main mix types including unique Sub mix mode
• Fully-assignable surface strip layout
• User definable channel names and colours
• Monitor capability with engineer’s Wedge and IEM strips
• Input, output and insert soft patchbays
• Quick access, analogue style channel controls
• Touchscreen for graphical view and setup
• Channel or mix view of sends on faders or rotaries
• Quick copy, paste and reset of mixes and parameters
• Libraries, Scenes and Show memories with USB transfer
• Get started quickly with built-in Template Shows
• Password protectable user profiles
• Editor software for online or offline PC control
• Carry out independent tasks with laptop and Surface
• Compatible with Allen & Heath PL remote controllers
• MIDI interface at both the MixRack and Surface
• Plug-in card slot for popular audio network and interface options
• Compatible with components from the flagship iLive range

iLive T Datasheet

Allen & Heath ZED FX Series

Complementing the existing ZED series, the ZED FX has been developed around an FX chipset purely for the new model. 16 essential time-delay effects add to the already bulging feature set. The mixer is ideal for small groups who don’t want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings.

ZED FX are easily controlled using 3 buttons and 9 LEDs. Quickly tap the ideal delay time or ‘dial-in’ the per fect amount of reverb on the lead vocal. One-stop navigation and editing… In fact, just as easy as your effects pedals. Hold down the TAP button and press the up or down button to alter the effects parameter, for example on patch (9) Plate, this would adjust the decay length. The ZED FX is designed to fulfil all the functions a small band would need without their own sound engineer. The layout and features have been arranged to be logical and instantly recognisable at a dark gig- a mixer you can trust to per form. The USB audio interface, with its uniquely flexible capability, allows different signals to be sent to USB, from LR or from selected aux buses. The USB return signal can be routed straight to the LR mix or to a stereo channel.  The connectors are placed on the top surface for easy plugging & patching, and the construction, with individual circuit boards firmly nutted to the top panel.

The ZED FX range currently comprises of the ZED-12FX and the 22FX. Between them they offer a solution for any small group or singer songwriter needing up to 16 mono inputs and 3 stereo inputs. Keyboards, microphones, samplers, the sky is the limit. Each mono channel has an insert point, allowing in-line effects such as compressors to be added to the signal chain, just like our large format mixers.

ZED FX Series Datasheet

Allen & Heath ZED Series

The feature-set is incredibly advanced for a mixer at this level – it has 13 independent sources to the mix, 10 independent outputs, 4 aux sends, a USB send & return for PC or Mac recording, playback and effects, a unique dual stereo input capability and some very advanced monitoring facilities. In fact, ZED-14 is so packed full of great features that you’d think it would cost much, much more!

It can be used for many different tasks, whether in live performance, utilizing plug-in effects via USB, live recording via USB and Cakewalk, studio recording or mixing down to produce your own 2-track recordings.

ZED Series Datasheet

Allen & Heath ZED-18

ZED-18 has an incredibly advanced feature-set for a mixer at this level – it gives musicians, venues and hire companies access to 10 full mono channels and 4 stereo channels in a compact, rack mountable format. Configurable USB audio in/out makes it easy to capture stereo recordings.
• 10 mono channels
• Neutrik mic XLR
• Neutrik 1/4 inch jacks
• Channel insert
• Super wide gain ‘DuoPre’ mic line input
• 3 band EQ with MusiQ
• 4 auxes
• Illuminated mute
• Sound image pan
• Illuminated PFL & peak warning indicator
• ALPS 100mm faders
• 4 stereo channels with 2-band EQ
• Stereo returns & playback
• All inputs with level control
• 12 bar meters
• Mono/stereo function on auxes 1&2
• Monitor output section
• Alt stereo output source
• Configurable USB stereo audio in/out
• Global +48V phantom power
• Cakewalk SONAR LE bundled with mixer
• Rack ears available

ZED-18 Datasheet

Altman 1000Q

A ruggedly constructed medium throw follow spot, the 1000Q produces a narrow, hard or soft edged beam. With easy to use controls mounted at the rear of the luminaire, the beam can be adjusted from spot to flood at any distance. The beam may be further attenuated by using the integral iris
for spot size adjustment and the framing shutters for top and bottom edge framing in the flood focus position. The 1000Q is designed for operation only with high performance quartz halogen lamps. The luminaire can be used in any application where manual control of a lighting beam is required to follow a performer and to vary beam size, quality and color.

• Rear operated controls 
• Integral iris and beam shaper 
• Six color boomerang with dowser 
• Integral 25' power cable 
• Sheet steel and die cast aluminum construction 
• Adjustable castered stand with cable hook included 
• Positive locking pan and tilt adjustment
• U.L. and c.U.L. listed for 1000 watts

1000Q Datasheet

Altman 360Q

A compact, lightweight ellipsoidal spotlight which produces a high intensity sharp or soft edged beam. It is available in different configurations producing a beam from 8 feet to 27 feet in diameter from a 40 foot throw. Four adjustable integral framing shutters provide beam shaping ability and the pattern slot and holder provide the ability to project visual images. While primarily designed for theatre applications, it is also useful in displays, museums, and night clubs. Maximum lamp wattage is 750 watts.

360Q Datasheet 

Altman 65Q

A lightweight, short throw, all purpose fresnel which produces a soft edged beam varying in diameter from 4.2 feet to 21 feet at a throw distance of 15 feet. This fixture is used in theatre for acting area lighting where beam shaping is not required or in television studios for key and backlighting. Maximum lamp wattage is 750 watts.

65Q Datasheet

Altman FC-1

The Focusing Cyc is a lightweight, compact luminaire designed to provide an even wash of light on cycloramas and backdrops, but this lighting instrument can also be used as a multi-purpose flood/fill light for stage and studio lighting applications. Each compartment has a state of the art, highly polished and peened reflector that pivots about the lamp for precision focusing, and a heat resistant knob with indexed position markings is located on the rear of the housing for adjusting and locking the reflector into position. Another feature is the adjustable lampholders which allow the luminaire to accept T-3 to T-8 lamps of three different lengths: 4 11/16 " (119mm), 5 5/8 " (143mm), and 6 9/16 " (167mm). The housing has a pair of rugged tool-free spring-latches which allow multiple units to be safely locked together in a number of ways: a straight row, curved horizontally, curved vertically, or any combination of the three.  A wide selection of yokes and other hanging hardware are also available to accommodate virtually all Focusing Cyc mounting configurations.

FC-1 Datasheet

Altman Luminator

A ruggedly constructed short to medium throw follow spot, the Luminator produces a narrow, hard or soft edged beam which zooms from 1.3 degrees to 9.3 degrees. With top mounted iris, color boom, and dimmer control handles, this easy to use follow spot is designed to utilize the unique high performance FLE, ENX and FXL quartz halogen lamps. The Luminator can be used in any application where manual control of a lighting beam is required to follow a performer and to vary beam size, quality and color.

Luminator Datasheet

Altman Satellite 1

A ruggedly constructed medium throw follow spot, the SATELLITE-1 produces a hard or soft edged beam which zooms from a 9.6' to 26.5' diameter circle at a distance of 75' with the iris fully open. The beam may be further attenuated by using the integral iris for spot size adjustment and the integral framing shutters for top and bottom edge framing. The Satellite-1 is designed for use with the 575 watt HMI lamp. The luminaire is used in any application where manual control of a lighting beam is required to follow a performer and to vary beam size, quality and color.

• Integral iris, framing shutters, and dimmer 
• Six color self-canceling boomerang with dowser 
• Adjustable castered trouping stand with wheel locks and leveling jacks, can be easy disassembled 
• Easy relamping 
• High output/low power consumption 
• Positive locking pan and tilt adjustment 
• Dual adjustable lenses provide 7°– 20° zoom range 
• Ballast provided with multiple power settings for line voltage variations 
• Detachable interconnect cable

Satellite 1 Datasheet

Altman Shakespeare

The 600 Series ellipsoidals give superior performance utilizing the HX600 lamp and a specially coated optical system which enables it to meet or exceed the output and quality of FEL based fixtures. It also produces a cooler focused beam for longer shutter, pattern and gel life. Features include an 180º indexed rotation of shutter centre, interchangeable lens barrel, drop in iris or rotating gobo, self aligning focus cap, and 6.25" gel frame holder with two accessory slots. Available in fixed focus configurations from 5 to 50º and two different zoom configurations; 15 - 30º and 20 - 40º.

Shakespeare Datasheet

Shakespeare Zoom Datasheet

Altman Spectra Cyc 100

 

The Spectra Cyc is a 100 Watt cyclorama/ wall wash luminaire utilizing red, green, blue and amber LED emitters. Designed for theatrical and architectural applications, the Spectra Cyc blends colors via a patent pending LED lens which reduces pixelization from direct view. The on board power supply allows for direct power & data input which can be daisy chained thru 8 units. Designed for use on 8’ centers maximum, individual units can be linked side by side for greater saturation of light. The Spectra Cyc is compatible with both DMX and RDM protocols, and comes complete with a library of pre-programmed single colors to various color mixes. Units are made for floor or Sky-Cyc applica- tions.

Spectra Cyc 100 Datasheet

Audio Technica U851R

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint™ rotating output connector, UniSteep® filter and UniGuard™ RFI-shielding technology. It accepts interchangeable condenser elements—available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

U851R Datasheet

Audio Technica U853R

Perfect for speech, theater, orchestra and choir sound reinforcement and recording, the U853R cardioid condenser hanging microphone is equipped with UniGuard™ innovations that offer unsurpassed immunity from radio frequency interference. With a consistent cardioid polar pattern, the mic offers natural sound from any angle, and superior gain before feedback. It is phantom powered and features an integral 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine™ line cardioid polar patterns.

U853R Datasheet

AVAB DDII

The AVAB Digital Dimmer II (DDII) is a highly advanced, second generation, true digital control system.   The DDII is not just a lighting dimmer.  It is a microcomputer, and can be programmed to perform a wide variety of tasks.  Control input is via USITT DMX512, Analog 0-10 V and serial data.  Onboard storage is 150 non-volatile channel/level presets.  The DDII is available in 1200, 2400 and 6000 watt versions and comes standard with either wall mount or rack mount hardware.

DDII Datasheet

Biamp Nexia CS

Nexia CS is a digital signal processor with 10 mic/line inputs and 6 mic/line outputs. Intended for a variety of conferencing applications such as boardrooms, courtrooms, and council chambers, Nexia CS includes a broad selection of audio components, routing options, and signal processing. The internal system design is completely user definable via PC software, and can be controlled via dedicated software screens, RS-232 control systems, and/or a variety of optional remote control devices. Multi-unit Nexia systems can be created utilizing Ethernet and NexLink digital audio linking.

• 10 balanced mic/line inputs on plug-in barrier strip
• 6 balanced mic/line outputs on plug-in barrier strip
• Ethernet port for software configuration/control
• serial port for third-party RS-232 remote control
• remote control bus for dedicated control panels
• NexLink ports for multi-unit system designs
• NEXIA software for Windows® 2000/XP
• pre-configured I/O with definable processing
• mix, route, combine, EQ, delay, control, etc.
• Mixers: standard, automatic, matrix, combiners
• Equalizers: graphic, parametric, feedback
• Filters: HPF, LPF, high shelf, low shelf, all-pass
• Crossovers: 2-Way, 3-Way and 4-way
• Dynamics: leveler, comp/limiter, ducker, ANC
• Routers: 2x1 ~ 32x32
• Delays: 0 ~ 2000 ms
• Controls: levels, presets, logic, RS-232, etc.
• Meters: signal present, peak, RMS
• Generators: tone, pink-noise, white-noise
• Diagnostics: transfer function

Nexia CS Datasheet

Chauvet LED Followspot 75ST

 

This portable, LED-powered followspot is equipped with a 75-watt white LED for a hardedge, focused beam. Easy to set up and tear down, LED Followspot 75ST comes with an included tripod. Extremely fast electronic strobe delivers silent operation with no moving parts. Super smooth LED dimming makes professional fading a breeze, while a single gobo slot projects crisp patterns onto any surface.

• Portable, LED-powered followspot creates a hard-edge, focused beam for any performance
• Set-up and tear down in seconds with the included tripod
• DMX or manual control options to suit a variety of requirements and needs
• Super smooth LED dimming makes professional fading a breeze
• Extremely fast electronic strobe delivers silent operation with no moving parts
• Single gobo slot projects crisp patterns onto any surface
• Mechanical iris reduces the beam diameter to focus light where it’s needed

Chroma-Q Broadway Scroller

The Broadway is specifically designed for low noise environments & features a unique cooling system comprising of three low noise fans. With its constant tension system the colour scroll will remain evenly aligned & tensioned at all times. The Chroma-Q Broadway fits a wide range of smaller aperture fixtures, including the ETC Source 4™, Altman Shakespeare & Selecon Pacific. Requires additional power supply.

Broadway Datasheet

Clearance Gobo

The gobos in the catalogue are on clearance sale for $ 9.99 each plus shipping from our Mississauga location, and applicable taxes.  Call us at 1-800-263-7878 for more information or to order.

Clearance Gobos Online Catalogue