Home
> Sales > Lighting
> Control Interface
|
| Here is a
sample of the available control interfaces. If you do not see what
you are looking for give us a call at 1-800-263-7678 or email to sales@jfrost.com |
|
|
 |
Pathway Pathport C
The Pathway
Pathport allows DMX over Ethernet. The low cost node comes loaded
with features bringing the power and simplicity of Ethernet distribution
with the reach of most facilities. Nodes are available with two
DMX512 inputs or outputs and fit into a standard 2 gang electrical
backbox. It has powerful DMX routing capabilities for up to 64
universes of DMX. Graphical LCD provides user assigned labeling
and network status reporting. It is powered directly from Ethernet
Cat 5 cable and is ESTA ACN ready.
|
|
Download
Pathport Information Sheet |
|
|
|
 |
Pathway Ultimate Converter
The Pathway Ultimate Converter
is used to translate or convert multiple lighting protocols. User
can select the following input and output protocols: DMX512, AMX192,
AVAB, Kliegl K96, Colortran CMX, Electro Controls, Micro-Plex 1 & 2
and Strand D54. Configuration is with a backlit menu driven LCD
display and features a security lockout function.
|
|
Download
Ultimate Converter Information Sheet |
|
|
 |
Pathway DMX Manager Plus!
DMX Manager Plus! can combine 2 or 3 DMX input universes into one output
universe or re-map the DMX channels between 2 inputs and 2 outputs with
a unique channel mapping feature. Pathport® Protocol compatability
allows you to use the DMX Manager Plus! as a 4-port DMX over Ethernet
gateway in your Pathport network. DMX Manager Plus! supports RDM and is
ACN ready.
|
Download
DMX Manager Plus Information Sheet |
|
|
 |
Pathway DMX Decoder
The DMX Decoder converts DMX, AMX or D54
multiplexed protocols to analog control signals. It is available
in 24 and 48 channel models with the starting address set in one dimmer
increments. The output is adjustable from 0-10V to 0-15V.
|
Download
DMX Decoder Information Sheet |
|
|
 |
Pathway DMX Repeater
The DMX Repeater can be used to properly
distribute DMX to dimmers, scrollers or other devices in a star
configuration. It can also be used to electrically isolate DMX
sources from controlled devices. It features 1 input, 6
outputs with a pass-thru connector and bi-directional capability for IPS
and Wybron talkback. It comes in 5 pin, 3 pin, RJ45 and terminal
strip versions.
|
Download
DMX Repeater Information Sheet |
|
